On Tue, 15 Jul 2003 01:54:53 GMT, "No Spam"
wrote:
Yeah.. there are styrofoam... are they designed for emergency when the boat
sink? I really don't know much about that... thanks for tips.
Boating Newbie
Yes, it's there to prevent your boat from sinking if "something bad"
happens. If you remove flotation to fit your dry-boxes, try to add
some in another location.
Another way to gain a live-well is to set up a cooler with a
"bait-saver" pump, and use that instead. They work very well, and can
can be found at Wal-Mart, etc. Saves you work, and saves the
flotation.
noah
"noah" wrote in message
.. .
On Mon, 14 Jul 2003 22:34:09 GMT, "No Spam"
wrote:
I have a basic aluminum 14' boat with benches, I want to install the
Hatches
and Liners (see link below) so that I can store my stuff or use it as
livewell.
My question is: Can I cut 11" x 15" rectangle on the aluminum bench to
fit
the storage compartment? if I cut it, will that weaken the bench or the
structure of my boat?
http://www.cabelas.com/cabelas/en/te...l-item.jhtml?i
d=0001527011144a&navAction=jump&navCount=8&indexI d=cat21314&podId=0001527&ca
talogCode=ID&parentId=cat21314&parentType=index&r id=&cmCat=&_DARGS=%2Fcabela
s%2Fen%2Fcommon%2Fcatalog%2Fitem-link.jhtml.2_A&_DAV=http%3A%2F%2Fa1460.g.ak
amai.net%2Ff%2F1460%2F1339%2F6h%2Fwww.cabelas.com %2Fcabelas%2Fen%2Fcontent%2
FPod%2F00%2F15%2F27%2Fp001527ii01.jpg
Thanks for help.
Boating Newbie
BN- cutting the bench will weaken it a little, but since most of the
stress is carried by the vertical sections, you should be OK. I would
be more concerned about removing any floatation contained in the
bench. Reach your hand up under the bench, and see if you can feel
styrofoam. If so, removing same will reduce your boats' ability to
stay afloat after a swamping. Something to think about.
noah
Courtesy of Lee Yeaton,
See the boats of rec.boats
www.TheBayGuide.com/rec.boats
Courtesy of Lee Yeaton,
See the boats of rec.boats
www.TheBayGuide.com/rec.boats