|
|
|
|
Problems raising Volvo 270 outdrive
On Tue, 15 Jul 2003 00:42:36 +0000 (UTC), (Bob)
wrote:
noah wrote:
:Bob- no way to be sure from this much info, but it sounds like you may
:have a bad electrical connection, or an intermittent switch problem.
:If it was me, I would start by disconnecting, cleaning, and
:reconnecting all the electrical connections related to the trim/tilt.
:You may want to use a little dialectric grease on them when you
:reconnect (No-Ox, or similar). It will help prevent future corrosion.
:noah
Thanks for the responses, Noah and Calif Bill.
I never considered that it could be an electrical issue since I can
clearly hear the tilt motor working when the tilt switch is activated,
but I'll check that side of things.
Bob
Ah....new info!  ) If you can hear the tilt pump motor running,
then check the fluid level in the trim/tilt unit. Also check for any
corrosion on the rams.
The plot thickens....)
noah
Courtesy of Lee Yeaton,
See the boats of rec.boats
www.TheBayGuide.com/rec.boats
|