On 4/13/10 11:08 AM, Loogypicker wrote:
On Apr 13, 10:45 am, wrote:
On 4/13/10 10:37 AM, Frogwatch wrote:





On Apr 13, 10:25 am, wrote:
I managed to overtighten my canvas boat cover last season and in the
process pulled the anchor roller through it at the bow, creating a nice
18" rip. Had a couple of other minor rips and tears. Got it all repaired
at a local boat canvas shop for $60, and the shop sewed on double
patches of vinyl at the bow where I pulled the cover too tight over the
deck hardware. $60 is a lot better than $400 for a new "semi-custom" cover.

Still evolving a quick tie/release system for straps that tie the cover
to the trailer...

Cheers.

--http://tinyurl.com/ykxp2ym

Small canvas loops around the edges of the cover. Run very thin
bungee material thru said loops. Put metal hooks on the ends of said
bungee material that hook under trailer frame. You can probably buy
stainless rod at Home Depot or even use stainless welding rod for
these hooks. Ace hardware sells the bungee material.

Yeah. I have the loops...and I've been considering that elastic bungee
cord. My trailer is made of aluminum i-beams, so I can probably drill
small holes on the flat parts of the beams to catch the hooks...

I'd prefer nylon hooks, I think.

--http://tinyurl.com/ykxp2ym- Hide quoted text -

- Show quoted text -

Yeah, that's what you should do. Weaken the trailer's structural
components by drilling holes in it.


D'oh...the aluminum I-Beams already have holes in them...for the
stainless steel bolt/nylon washer/nylock nuts that hold the trailer
together and for the fender fasteners and for the sidelights.

This isn't a lake lanier clapped out old bassboat special trailer, Loogy
for Brains.

Nice try, though. You're doing well as an ankle-snapping pomeranian.




--
http://tinyurl.com/ykxp2ym