noah wrote:

:Bob- no way to be sure from this much info, but it sounds like you may
:have a bad electrical connection, or an intermittent switch problem.
:If it was me, I would start by disconnecting, cleaning, and
:reconnecting all the electrical connections related to the trim/tilt.
:You may want to use a little dialectric grease on them when you
:reconnect (No-Ox, or similar). It will help prevent future corrosion.
:noah

Thanks for the responses, Noah and Calif Bill.

I never considered that it could be an electrical issue since I can
clearly hear the tilt motor working when the tilt switch is activated,
but I'll check that side of things.

Bob