In article ,
wrote:

THE HORSE**** ARTIST DRIVELED:
Total nonsense.

Sounds like you applied it over wax or a poorly prepared surface,
rather than following the clear instructions. The prep must be done
correctly if you expect to have good results.

You also should have used the stripper supplied by poliglow for
removal. It comes off quite easily.

BB

It was applied after wet flat sanding with 1000 grit followed with
silicone 'lifter', dried washed .... then followed the instructions.

It did look nice for 4 months on a horizontal apron deck ... but soon
faded. I re-did it again and still faded and flaked after another 4
months.