On Feb 9, 12:27*am, Frogwatch wrote:
First, I don't even know what a downrigger does in fishing. *However,
while looking thru the Waste Marine catalogue for something else, I
saw a Downrigger swivel/slider mount and was struck by how much it
looked like the small camera mounts my engineers are making from G10
and Aluminium on their CNC mill combined with the dovetail G10 mount
they made for the SeaCook stove that was given to me by Cap'n Dan a
couple weeks ago.
So, I looked closer and sure enough, these downrigger mounts are made
of a glass/resin composite. *Hmmmm..........my guys could make these
easily.
So, WTF does a downrigger do and why does it need to slide and swivel?
Inspired, I looked through the rest of the catalogue for similar
stuff. *Sure enough, in the section on pedestal seats for boats, there
was an expensive CNC machined slide/swivel for a seat. *Why on earth
would somebody need such a strong swivel/slide seat? *IS there
actually a market for such?
THEN, I started thinking about the crappy plastic VHF antenna swivel I
had that I replaced with a massive Stainless casting from China that
at least works simply because it is made of steel. *Dang, they could
make a lightweight version of this from G10. *This is one of those
mounts that allows your antenna to be locked in any position (vertical
for use and horizontal for trailering).
Thoughts?

Another thing I thought of was accessories for kayak fishermen who
want to mount stuff on their boats. *Screw *G10 dovetails to the deck
and then slide in a rod holder, GPS holder, compass, fishfinder, etc
that he could remove before putting it back on his car.

They already market cameras that you can put down with the Downrigger.
People are using them on the Great Lakes.
Downriggers drag a " Cannonball " of lead to drop the lure to the
depth they want. Usually 8 or 10 pounds.When the fish grabs the lure,
the "Quick Release" lets go of the line, and the fight is on. The
weights are also available in the form of a fish, that glides with
better hydrodynamics. The ones I've seen are coated in a
tough ,flexible plastic/rubber compound.
A lot of fishermen are also now using Lead Core Line, as well. This is
not used with Downriggers, but long lined off the stern of the boat as
you troll. This method has yielded good results.
Another product a fellow has invented is called a "Torpedo Diver".
It's the shape of a torpedo, with what looks like Dart flutes at the
rear to help it stay strait. I only need 53 ft. of line to get down 37
feet. I find this better than spooling out 167 ft of line on a " Dipsy
Diver" to get down the same depth. We can run a Dipsy off each side,
and two Torpedos off the stern. Dipsys can be set to go right or left,
by the use of the directional fin on the bottom.You set this with a
simple Phillips screw on the bottom. Sizes range from 1.5 inches up to
4 inches in diameter, depending on the depth you wish to fish at.