Harry wrote:
nom=de=plume wrote:
"TopBassDog" wrote in message
...
On Dec 21, 8:01 pm, "nom=de=plume" wrote:
"John H" wrote in message

...

... put a big hole in my boat cover. Went down today to see if there
was any damage. Found the cover torn where I had it propped up to
'tent' it. The 20+ inches of snow, with no wind to speak of, just
wouldn't fall off the cover and the weight caused it to rip.
So, I need a good way to repair about a 1' by 2' section of boat
cover. Might try iron on patches, if they come that big. Don't feel
like investing another $400 for a new cover now.
Any suggestions?
--
Have a Super Christmas and a Spectacular New Year!
John H
Try a sewing machine and some weather resistant fabric?

--
Nom=de=Plume

That's been mentioned a few times, D'Plume. As brilliant as you are,
I'd think you'd bring something new to the party.


I think as brilliant as you are, you'd realize that I posted it well
before the others.

Well then. You should get all the credit for the " brilliant"
suggestion. Well done.


On second thought, study the enclosed post below, pay attention to the
time line, and get back to us. Dumb bitch.

"John H" wrote in message
...
On Mon, 21 Dec 2009 19:23:22 -0500, Wayne.B
wrote:

On Mon, 21 Dec 2009 19:05:18 -0500, John H
wrote:

So, I need a good way to repair about a 1' by 2' section of boat
cover. Might try iron on patches, if they come that big. Don't feel
like investing another $400 for a new cover now.

Any suggestions?

If it is canvas it will need to be sewn to have any strength. Any
sailmaker or canvas shop should be able to do it in a few minutes.

Good idea. I found a couple shops in the area that make boat covers,
so they should be able to repair one. I'll make some calls tomorrow.
--

Have a Super Christmas and a Spectacular New Year!

John H

Any upholstery shop can do the job.




--


Imagine being such a worthless p.o.s. that you post on usenet using
someone else's ID