View Single Post
  #38   Report Post  
posted to rec.boats.cruising
Wilbur Hubbard Wilbur Hubbard is offline
external usenet poster
 
First recorded activity by BoatBanter: Feb 2007
Posts: 2,869
Default Uniden 525 VHF and general question

"Bruce in alaska" wrote in message
...
In article s.com,
"Wilbur Hubbard" wrote:

"Bruce in alaska" wrote in message
...
In article s.com,
"Wilbur Hubbard" wrote:

"Wayne.B" wrote in message
...

Agreed but you could have a bad connection which is heating up under
load.



BINGO! They use one of those crap, 'slow burn' fuses. They heat up
and
the
extra impedance reduces the voltage. Get rid of it and put a higher
amperage
rated, fast burn fuse in - end of problem.

Wilbur Hubbard

Bull****.... Wilbur, you need to stick to stuff you know about....
as Peter Bennett pointed out, if the volume at the receiver dropped,
but
the background noise didn't change, then the problem is in the
Modulating Deviation, not the Power Output.... This is FM not AM or
SSB.... In FM, once you exceed 12 db of Receiver Quieting the
Background Noise, changes are hardly perceptible, and in FM, the volume
produced in the receiver is directly proportional to the Modulation
Deviation of the Transmitter, until it exceeds the bandwidth of the
Receiver.

--
Bruce in alaska
add path after fast to reply





You don't read too well, dude. Skippy said the volume of his
'transmission'
as heard by other listeners in nearby boats decreased noticeably after
about
a minute.

So the problem is with Skippy's transmitter and not his receiver. If the
fuse heats up and the voltage drops and the "low voltage" indicator
flashes
in the readout as Skippy indicated then that should tell you something.
Duh!


Wilbur Hubbard


Actually it is YOU, Wilbur, who can't read, or does NOT understand the
technology that you are talking about. The Deviation of the Modulator in
Skip's Transmitter is EXACTLY what we are DISCUSSING and the VOLUME of
Skips signal has absolutely NOTHING TO DO with the Power OUT of his
Transmitter, but everything to do with the Modulation Deviation of his
Transmitter.... This is why a One WAtt Handheld sounds just as loud, in
a receiver, as a 25 watt radio, when both signals are above the 12db
Quieting Threshold of that receiver.... You just show your ignorance,
when you spout off about things you have no Clue about....

--
Bruce in alaska





PKB! You're the one who's clueless. I happen to own one of those crap
radios myself and I have discovered all their foibles and failings. You are
just operating on theory and your theory is little more than an uninformed
guess. So take a hike. When you get some experience with this particular
radio perhaps you can return then.

Besides, anybody living in Alaska where he gets is ass frozen off most of
the year can't be too bright in the first place.


Wilbur Hubbard