mx wrote:
Will all epoxies bond to one another? I have some West GFlex, which I
want to use thickened to fill a gap between two loosely-fit fiberglass
parts, and some System Three laminating resin (Clear Coat, I think, I
don't have it with me right now) that I then want to use with glass
tape to reinforce over the surface of the joint. Will the epoxies
bond well to each other, if the glass is applied within a few days of
the first resin?
Also, is colloidal silica and microballons the same? I have an old
bag of house-brand microballons from Fiberlay, and colloidal silica is
recommended as a thickener. I feel like I used to know the answer to
this...but, apparently, I'm an idiot!
Thanks,
Mike
epoxies are a universal primer and epoxy will stick to epoxy, but watch
out for amine blush. Some/most venders (like the ones you mention)
sell the bushing epoxies because they make more profit/ Blush can affect
the bond between layers.
fumed silica is a common thickener... microspheres are tiny hollow
spheres, very light and fine (comes in different densities) - thickens
the epoxy but acts like tiny ball bearings in the epoxy
paul oman - progressive epoxy polymers inc.
www.epoxyproducts.com and
www.epoxyusa.com
--