Thanks, Rick. I'm an electrical contractor at the moment and your product
list is very familiar to me wrt underground splices. Soils have similar
pernicious chemical liabilities to electrical lines that seawater does, it
seems. I wondered if Scotchkote was a common marine solution.

Padeen


"Rick" wrote in message
hlink.net...
padeen wrote:

Sooo..... What DID you use as a sealant ...?

Well, it was a multistep process that started with soldered butt
splices, covered with heatshrink. The stepped splices were then wrapped
with a well stretched layer of self-vulcanizing tape and the whole was
filled with a 3M product called ScotchFil, a soft, thick, rubbery tape
that filled all the voids between the conductors. Next, the smoothed
Scotchfil was wrapped with another couple of wraps of self vulcanizing
tape until the splice was smooth and solid. Final wraps of a vinyl tape
like Scotch 33 overlapped the entire length and then that was secured
with cable wrapping thread and finally the entire splice was coated with
Scotchkote, a rubber glue type of sealant.

These splices were almost guaranteed to work to 10,000 feet. Note the
almost ...

Rick