Steve wrote:
Thanks, Peggy. That was a wonderfully detailed reply. You're not kidding
about the current draw. I guess that explains the dimming lights during
flushes.


Yep, it would. But it shouldn't do that...that's a sign of an
electrical issue. Some things to check out:

Electric toilets should always be on their own dedicated circuit, shared
with nothing else. If the boat's PO didn't save the manual (what passes
for one, anyway) that has the electric specs in it when he installed it,
pull one off the Jabsco website at http://www.jabsco.com and make sure
that he used the right wire size for the distance distance from the
battery (measured round trip, not one way). Put volt meter on it while
flushing and make sure it's getting a full 12v. If not, check
connections, and check the battery to make sure it's putting out a full
12v...the battery may be weak, or not being fully charged (which would
reveal a whole new can of worms...boats are like that).

Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://www.seaworthy.com/html/get_ri...oat_odors.html