"Gene" wrote in message
...
On Sat, 28 Mar 2009 13:34:43 -0800, "Calif Bill"
wrote:


"SteveB" wrote in message
...
I just went out and tried an SOS pad. The paint came off easily. It
shines the metal a little, but that's liveable, as it will oxydize soon.
The places where it is oversprayed are thin misty kinds of spray
patterns.
This will be much easier than I thought. I did discover that I will have
to drill out some of the through the hull rivets to totally remove
benches
and console, but I can put back gasketed bolts and nylocks. With the
benches and console completely removed, I can get a nice coat of paint on
them, and make them acceptable looking again. Don't want to go into
restoration, but I do like to have things looking nice.

But I'll probably take it fishing a few times first just like it is.
Probably stop catching fish out of it when I doll it up, tho. Seems
that's the way it goes. Maybe I'll just leave it like it is...... get a
couple cans of rattlepaint ..... some brown and green and paint it camo.
Sneak up on those fish.........

Steve


DO NOT USE SOS pad or steel wool! Get 3M pad. The steel wool breaks off
little bits of iron and sticks in the aluminum causing nasty rust stains.


AND even WORSE dissimilar metal corrosion....
--

Forté Agent 5.00 Build 1171

"Twenty years from now you will be more disappointed by
the things you didn't do than by the ones you did do.
So, throw off the bowlines. Sail away from the safe harbor.
Catch the trade winds in your sails.
Explore. Dream. Discover." - Unknown

Grady-White Gulfstream, out of Oak Island, NC.

Homepage
http://pamandgene.tranquilrefuge.net...at/my_boat.htm



Does not seem to be a big problem with steel wool. But a piece of copper
wire will make a hole through the boat.