hpeer wrote:
I have Volvo MD7A, 13 hp two cylinder unit with salt water cooling.

Runs perfectly with one exception, it occasionally overheats and I can't
figure out what the heck is going on. I bought the boat used and the
previous owner had fitter her out himself. Every time she overheats, I
find something to "fix" after which she is fine for a spell then she
will overheat again. Clearly I'm not getting to the root cause.
Generally she will seem to be running along just fine and all of a
sudden the pressure gauge just goes up, up, up. It seems to be a
bi-state kind of thing, it either works perfectly well or not at all.
Its almost as if there is a ball valve or something somewhere that is
sticking. It's obviously not a bad gage.

The plumbing goes like this:
Through hull fitting
Salt water strainer
Tap to the transmission/engine
Tap to secondary pick up from bilge
Tap to sinks


Here is some of the history and what I had done, in each case I have
also checked/changed the impeller. They usually look just perfect.

1: Recently fitted salt water strainer seemed to be blocked with debris
from its construction. It is home built out of some interlocking pieces
of PVC pipe, the inner piece has a zillion small holes drilled in it. I
dumped this stuff out and she was fine.

2: Found a small leak in the copper pipe from the transmission to the
impeller. I thought that maybe it was sucking in air and the impeller
was getting air bound. Repaired the leak.

3: Moved and lowered the salt water strainer. This was mounted pretty
high on a bulkhead with real long hoses. I moved it to the engine
compartment and lowered it. I thought that maybe there was just too
much suction head to get the water going.

4: Threw thermostat overboard.

Any clues?

Many thanks,

Howard

Is water coming out of the exhaust?

It will come out of exhaust irrespective of the thermostat position.

So if you have water then there is insufficient circulation around the head and block.

As you have removed the thermostat, try clearing the small hole behind the thermostat in
the housing. Its prone to blocking with rust/crud as it's small.

Best of luck