View Single Post
  #10   Report Post  
posted to rec.boats.cruising
Charles Momsen[_2_] Charles Momsen[_2_] is offline
external usenet poster
 
First recorded activity by BoatBanter: Dec 2008
Posts: 11
Default dock box A/C mystery


"Capt. JG" wrote in message
easolutions...
"Larry" wrote in message
...
"Capt. JG" wrote in
easolutions:

either someone has been
deliberately turning off the A/C (not necessarily maliciously) or
something in the box is tripping the switch


When a breaker trips from overcurrent, it needs to be "reset" by pushing
it
into the off position, or pushing a popout button on some breakers.

You talk as if the breaker has just been switched off as you said nothing
about having to reset the breaker before turning it on.


Yeah, there was no resetting. It's either on or off, and the maint. guy
mentioned the "possibility" of it tripping. I think it's bs.


So, I'm thinking deliberately turning it off...saving the marina $$$, a
motivation unto itself.


They have no motivation, as far as my boat is concerned. The guy across
the walk from me is power hog many times over by comparison.


To turn the breaker off requires a finger to push on one side of the
breaker toggle handle. Coat that side with greasepencil lightly so it's
not very evident. Make the coat smooth so we can see that fingerprint of
the SOB that's flipping the breaker on you. That will let use at least
see
"SOMEONE" is flipping it off.

Office supply places also have a permanent staining red ink that won't
wash
off. It's available in non-drying printer's ink like they put on a press
with a roller. It takes months to "dry". You could coat the toggle with
that then casually watch marina people's fingers for the indelible red
stain....


I would do this, but I'll just end up with a red finger. LOL


I was thinking of getting a lock for the flip up cover, but I don't think
the marina would like that too much. I'm going to talk to my neighbor and
see if I can use his A/C connection for a while. He doesn't have anything
plugged in anyway. His switch was on when I got there... just mine was
off.

For the next couple of weeks, I asked the maint. guy to be kind enough to
check it from time to time, which he agreed to do. They don't have much
interest in having someone's bilge pump fail after a rain and end up with
a boat on the bottom.


--
"j" ganz @@
www.sailnow.com




You can't lock the breaker because it's probably against the law - either
firecode or NEC (National Electrical Code). Do you have a GFI circuit?
Sometimes they go when a stray ground current appears. Also check to see if
the polarity of your circuit and any of your neighbors are reversed. You can
do that with one of these:

http://shopping.msn.com/prices/3-led...0v-outlet-5-15

They're inexpensive and handy in the home.

You can get the cord checked with something called a Megger -

http://en.wikipedia.org/wiki/Megger

One may be available at the marine radio place nearby.

If it's none of them then replace the breaker. It costs about $15 bucks and
plugs in.

If it's not that then someone is throwing your breaker and it's probably
someone who doesn't like you for whatever reason. You haven't gotten them
****ed at you at the marina too, have you? Is anyone from SEA docked near
you?

Hope this helps.

Regards,

Admiral Momsen