"Cindy Ballreich" wrote in message
...
The raw water thru-hull for our boat (a Baba 30) is located aft
of the engine in an area only accessible by removing everything
from the cockpit locker and then hanging upside down reaching
below the cockpit. Obviously, this is potentially a big hole in
the boat that may need to be closed in a hurry. We'd like to find
a solution that doesn't involve leaving the only cockpit locker
empty, moving the thru-hull, or just leaving the darn thing open
all the time and hoping for the best. Since the nearest bulkhead
is the back side of the ice box, there doesn't seem to be any
place that an access hole could be cut. This is a traditional
heavy bronze thru-hull with a ball valve (90 degree lever
handle). It seems like someone ought to make some kind of
extender that would allow the thru-hull to be operated from the
cockpit locker.

Does anyone know where we might find one?

Any other ideas?

Cindy

You could consider a Morse (push-pull) cable. You need to fasten the cable
so that it intersects the valve body at 45 degrees so that it can open/close
the valve easily.


--
Evan Gatehouse

you'll have to rewrite my email address to get to me
ceilydh AT 3web dot net
(fools the spammers)