Marty wrote:

Richard wrote:

Bruce In Bangkok wrote:




No, I said to google on rivets and the part number. That will lead you
to a several sites that explain the rivet size coding's. But you are
right, anyone who's life is banging rivets in the side of an airplane
will be likely to understand rivet sizing (Size is in 32nds of an
inch).

But you don't need to use cherry rivets you can also use aluminum "pop
rivets". You may need to space them a little closer but they will hold
unless your track is tremendously over stressed.

The SS machine screws suggested will also work. Just coat them with
any of the various sealants - 3M 5200, Sekaflex, maybe even house
silicon sealant. They may be a little stiff to remove but I've been
doing it for years with no corrosion and no problems in removal.

Cheers,

Bruce
(bruceinbangkokatgmaildotcom)


I kinds have an issue with screws in the mast.
Unless the wall thickness is at least 2x the diameter, there just isn't
a lot of thread in the mast.



I don't think you need that much, 3 full threads should be sufficient.
Even at that you are probably correct, the wall is not thick enough for
even that.

I have a compound rivet tool that will let me install 1/4" shank rivets
with hand pressure alone.

Cheers
Martin

Find a link for it, Martin, because I want one too!