BoatBanter.com - View Single Post

Boater

Eisboch wrote:
"Reginald P. Smithers III, Esq." wrote in message
...
Boater wrote:
...little place for them here, eh?

http://i21.photobucket.com/albums/b2...s/ce0a1de9.jpg

Anyway, here's a snap of Yo Ho's business end. I'm waiting for the
shrinkwrap guy to show up this week. Wrapping the exhaust after the motor
drains is part of the winterizing process. I've got to spend a few
minutes removing the rust from the prop and repainting it. One of these
days I'll find a prop paint that actually stays on the blade tips. :)
What surprised me was the rust on the aluminum prop. My props (much older
than yours) have lost half of the black paint, I have had some dings
removed, and it has touched the bottom a time or two, but has never shown
a hint of rust. Is rust on aluminum props common in salt water?

As far as painting the props, my props started to lose their paint in the
first year, and I asked the mechanic if I should touch them up. His
comment was that the new paint would "spin off" as soon as i put the boat
back in the water. Don't know if that is true, but it sure has save me
the trouble of repainting the prop. Based upon your experience repainting
props, he was correct. When I have had the prop dings smoothed out and
balanced, the prop shop never bothers to repaint the props for the same
reason.

That's not rust. It's probably a primer paint for aluminum.

Eisboch

Gawd, I love it. :)