Thanks for the info.
Just a couple more questions for you that come to mind reading your
response,
How does one stop the rain leaks? will goop marine fix epoxy paste
that you pick up at canadian tire or other hardware stores work? or is
there some other type of product i should use?
Secondly, how does one get rid of mould and stuff? is it even possible
or do i have to replace the wood with mould (mostly the deck around
the rain leaks) what do i use if it is possible? my boat is out of
the water, has been all winter. do i have to recaulk it or just putty
the seams again? any help is GREATLY appreciated. lol. should've
bought a dingy, less work. lol.

On 13 Jun 2004 17:51:57 -0700, (Ed Humphries)
wrote:

bobsuruncle wrote in message . ..
I want to repaint the hull of my boat. i know i should use good
quality antifouling paint. My question is if i need to use a primer
or not. the hull is mohogany but i dont know if i need primer. if
so, which kind do i need?

I believe you'll find that the best way to get good adhesion and long
life is proper preparation. Read the instructions: most are pretty
clear about what it takes to get a good application. Read the experts
books.

What you will find out is that you _might_ be able to get away with
just sanding the old paint down and then paint over it. But for a
good job you need to get the old surface down, fair, and then prime
it.

I'm in that process now myself. Have fun and good luck!

Cheers, Ed Humphries
Atlanta, Georgia