"mmc" wrote in message
ng.com...
"Dave Brown" wrote in message
news:1cKdnUhuYafCXYDUnZ2dnUVZ_orinZ2d@wtccommunica tions.ca...
mmc wrote:
The tilt on my 1997 Force 50 has developed an intermitant problem-
always works to lower and sometimes works to raise the outboard.
If it doesn't work, I leave it sit for a while then check it again
followed by unplugging and plugging the 3 sets of connectors from the
harness to the motor. Last time, I checked the voltage at the connectors
closest to the motor and was getting about 9 volts in both switch
positions.
My unplugging/plugging game didn't work that time so I swapped the wires
(2 on this model) and the motor tilted up and for a moment tilted down
but didn't the second time I tried.
Do you get a relay "click" the times it doesn't work?
--
Regards,
Dave Brown
Brown's Marina Ltd
http://brownsmarina.com/
Don't think I'd ever heard a click but will check again. I'll get the Mrs
to mess with the switch while I listen at the motor. I can't hear a click
from the helm, but I can't hear very well anyways so that doesn't mean
it's not happening.
I used a remote switch flipper tool (boathook) and checked it. No click when
it doesn't work.