View Single Post
  #19   Report Post  
William R. Watt
 
Posts: n/a
Default Luan 1/8" for skiff?

Backyard Renegade ) writes:

I can't even argue with you about this anymore, it is useless. I will
say it one last time, everyone who reads your posts here is not as
experienced or as lerned as you, and to so hardheadedly advocate luan
and polyester the way you do is just irresponsible. I myself do
reccomend these materials to several folks a year, but only after one
on one exchange and a good understanding of the questioners needs and
abilities. I have nothing against these materials when used by someone
who knows what they are, what they can and can't do, how to rapair
them, how to build the rest of the boat in such a manner as to
accomodate their weak characteristics..... etc... ugh...
Scotty from SmallBoats.com, peace dude.


I've never written "don't use marine plywood or epoxy resin". I only write
objections when people write "only use marine plywood and epoxy". I'm not
writing any less responsibly than yourself with whom I happen to agree.
I had no experience when I did not use marine plywood or epoxy although I
had read a few books and read what people were writing in this newsgroup.
It's not rocket science, as you Yanks say.

--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned