View Single Post
  #23   Report Post  
posted to alt.binaries.pictures.tall-ships
Bouler Bouler is offline
external usenet poster
 
First recorded activity by BoatBanter: Mar 2007
Posts: 1,840
Default NL - Friesland _ Prinsenhof _ tacking a skutsje - file 4 of 5 DSC_8043_bewerkt.jpg


"HEMI - Powered" schreef in bericht
...

There are really two parts of the Titanic disaster/tragedy still being
investigated: the causes related to Capt. Smith's decision to
(apparently) ignore warnings from other vessels and modern information
just now coming to light as to structural weaknesses in the hull of the
ship itself. For the latter, one can point to the design standards for
metalurgy and riveting of the day as well as theories still being
investigated as to whether a gash was actually ripped open on the
starboard side or just many plates that buckled. Also, new information
suggests that the bottom of the hull fatally scraped along an
outcropping the the ice berg which ruptured the hill longitudinally for
some distance. Both are virtually impossible to prove or disprove even
with several successful dives on the wreakage site because the hull
sits in a position where it is impossible to determine a root cause and
reluctance to bring up any more steel makes it difficult to do more
extensive metalurgy studies. For the former, one can read the eye
witness accounts of the sinking from survivors and see gross
inconsistencies, such as whether the hull did or did not break in half
before the ship went down (it is now clearly known that it did crack in
half as the bow and stern sections of the wreakage are a couple of
miles apart).


You're very well informed.

And then, we can discuss the primative and dangerous safety standards
of the day wrt life boats, etc. Thank God, though, at least for
wireless. Now, for many aspects of the Titanic sinking, Bouler, you're
into MY areas of expertise, especially those of engineering and amateur
historian, but NOT those of a nautical nature per se.


I had the feeling I was stimulating you in this case and I as rightgrin

Have a good day and thanks for a stimulating discussion!

It was not that bad Jerry;-)

Thank you, Bouler, I appreciate the critique. It is better not to
lead with one's chin when venturing into areas where one does not
have a lot of knowledge and/or is unsure of one's facts, don't you
think?

Very wise spoken Jerry.


I learned this trick from an older engineer early in my Chrysler career
when I still thought I was God's gift to the science and practice of
engineering. Briefly stated, I was told quite profanely and quite
abruptly that if one thinks they know, say, 85% of a given thing and
wish to find out the rest from the true experts, the LAST thing to do
is state all the stuff already known. Rather, I was told, to be very
humble and ask the expert to explain the basics of the issue, listen
patiently during the 85% already known, then perk up the ears when the
remaining 15% is told. The advantage, which I came to find out later
was especially valuable, is that the true expert is now one's friend
and my reputation is enhanced as a reasonable person rather than what
some people call a smart-ass or young whipper snapper. You might recall
during our gettting to know each other phase here that I used this
technique politely to learn the true nature of the on-topic ships for
this NG under the guise of asking a question about my understanding of
the term "tall ship", and NOT stating my facts as if they were the
Gospel because while I thought I was correct, I KNEW that you would
have the right definition for the various categories of sail and
powered boats and ships.

Again, thanks for the excellent discussion.

Very smart after all;-)
Nobody knows 100% of something is my humble opinion.
A specialist is someone who knows almost everything about almost nothing.
--
Greetings
Bouler (The Netherlands)