"Freddie Richard" wrote in message ...
What would you use instead of epoxy? or what would you recommend?

Nothing! The brunt of this discussion is that Epoxy is not a miracle
cure all, it is however probably the best the average builder has
available. The point is that Epoxy can be part of a process that will
control water movement, but it is a team effort and it takes paint,
fiberglass, proper preperation, proper application, some effort and
thought of the builder, and of course dillagence (sp?) on the part of
the owner.
Scotty from SmallBoats.com

--
Thank You,
Freddie L. Richard


"William R. Watt" wrote in message
...
The owner of an epoxy sheathed plywood (okume marine) kayak was showing me
today the deterioration in the surface ply on the inside of the hull. The
builder had let the boat sit outside over the winter mistakenly assuming
epoxy was impervious to H2O. Snow accumulated in the cockpit, melted,
froze, melted again, and by late spring there was 6" of melt water inside
the hull. The epoxy sheathing on the inside of the hull did not stop the
water from getting at the plywood and starting rot. Accept the claims of
epoxy purveyors and promoters at your peril.
--
--------------------------------------------------------------------------
----
William R Watt National Capital FreeNet Ottawa's free community
network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned