New higher capacity ro watermaker membranes available from Dow Filmtec - needs pump design changes?
Suction pump on the product side?
Brian W
On Tue, 28 Oct 2003 20:27:46 -0500, Glenn Ashmore
wrote:
That is not physically possible. THe best you can do is minimize it.
It takes almost 2 psi to push half gallon a minute through the 1/4"
fitting at the end of the pressure vessel.///
wrote:
They say you're not allowed to have any product/permeate side back
pressure. Was prob the case on the older version as well.
///
|