This may be more than you need but look at a Pumptec T112. 2 GPM @
250PSI. Street price is about $170. With about $35 in stainless
fittings, hose and a couple of #3 15º pressure washer nozzles and you
have an anchor washdown system that will blow off the stickiest oyster
bank mud.
http://www.pumptec.com/AgCatalogPage...Ag_03_2002_pg4
Don't use it for domestic water though. It will blow out every hose on
the boat. :-)
yes wrote:
Need a 12 VDC potable water pump that puts out 125-150 psi at about 1
gal per min - this is low usage so cheap is good. Any suggestions.
--
Glenn Ashmore
I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at:
http://www.rutuonline.com
Shameless Commercial Division:
http://www.spade-anchor-us.com