There is a nice explanation of lapstrake gains at the ends in Howard
Chapelle's book BOATBUILDING. It is a classic for all small boat builders.
IMHO, it is best made with a rabbit plane and it is a lot easier than it
looks.
Dave
"P.C." wrote in message
k...
Hi
"P.C." skrev i en meddelelse
k...
Hi
"Meindert Sprang" skrev i en meddelelse
...
I used a power plane to do that. Divide the total length in four equal
parts
and mark them. Set the plane to 1/5 of the maximum depth you want to
make
this gain (1/2 plank thickness). Plane from the first quarter marker
to the
end of the plank. Then another sweep from the second marker to the
end. A
third sweep from the third marker to the end and two final sweeps over
the
full length. Done.
Meindert
Sorry I placed the wrong link , this is the one ;:
http://w1.1396.telia.com/~u139600113/detail.htm
P.C.
http://groups.yahoo.com/group/Cyber-...ngboat-5meter/