Hi

"Meindert Sprang" skrev i en meddelelse
...
I used a power plane to do that. Divide the total length in four equal parts
and mark them. Set the plane to 1/5 of the maximum depth you want to make
this gain (1/2 plank thickness). Plane from the first quarter marker to the
end of the plank. Then another sweep from the second marker to the end. A
third sweep from the third marker to the end and two final sweeps over the
full length. Done.

Meindert

Exactly , ----------- and then a guide piece clamped on, to rest the rabbet
plane to do the finish.
BTW, -------- check these instructive drawings ;

http://w1.1396.telia.com/~u139600113/plotfile.JPG

P.C.
http://groups.yahoo.com/group/structure-testbench/