Installed a Prosine 3.0 last Fall. That big enough? :-)

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"Brian Whatcott" wrote in message
...
On Sun, 20 Jan 2008 22:12:22 +0100, Markus Baertschi
wrote:

Glenn Ashmore wrote:
At the rated 1000 watts that works out to about 11 AH.

1000W@12V takes towards 90A. You'll need a good inverter for this to work.


Markus

Errr...that would be a 1000W or a 1500W inverter, I assume?

Brian W