Hi Folks:
This engine will crank, start almost instantly, then stall. Then
bind a bit, crank some more (actually much more) untill I pull the
plugs.
The lower cylinder of this three cylinder in line is being pumped
with water. I pulled the head off, cranked, and I see alot of water
in the exhaust ports of the lower cylinder. I was hoping for a broken
head gasket. Maybe this will not be too bad. The compression was
good. This cylinder/piston seems a bit tight/dry as it squeeks when I
crank it by hand. Understandable if all the oil is washed off. Could
this be just a blown gasket in this exhaust manifold/box on the side
of the engine? It looks like a pain to change, although I did get all
the bolts loose without snapping!
Thanks for any help/info!
Take Care!
Harry