Thread: Fuel filters
View Single Post
  #9   Report Post  
posted to rec.boats.cruising
RichH RichH is offline
external usenet poster
 
First recorded activity by BoatBanter: Dec 2007
Posts: 197
Default Fuel filters

OK Brian, ........... lets not get carried away.....

by depth filtration I dont mean toilet paper and kitchen towel
rolls.
Such cellulose in 'those' items are designed to fall apart after long
soak in water ....
The cellulose fibers are not 'resinated' and thus bound together; if
the fibers can 'move' under increasing pressure such 'filters' will
unload the debris back into the system.
Assuming that the pressures are kept low enough to keep these 'items'
from unloading they are not a 'graded poer density' ... meaning that
the average pore size is uniform throughout the matrix .... by depth
filtration I mean a statistical graded pore density filter media in
which the statistical 'pore' size gets smaller and smaller as you get
deeper into the filter matrix.
Further the toilet paper and kitchen towel filters are sealed with a
'knife edge' which is simply not a very good means to 'seal' a filter
under about 40µM .... the knife edge sealing methods simply 'bypass'
liquid, especially as the supposed filter material under increasing
pressure 'moves'.
Although the cost of toilet paper and kitchen towel filters is small,
the housing $$$$ are immense in comparison to 'efficient' filtration
thus the initial first cost is much much higher - false economy.
Toilet Paper and Kitchen Towels do not have the 'fibers' fixed in
place by resin binders .... and the fibers that can be 'released' can
be as much in weight as what you intend to capture ..... ever hear of
papier mache?
Kotex pads stuffed into an empty filter housing would be vastly better
than toilet paper and kitchen towels.

So, when I speak of 'depth filtration' I mean a fairly accurate graded
pore density filter media ... an example of such would be as used for
the filter-press filtration of BEER and other beverages used to
remove a high % of solids; filtration that is specifically engineered
to remove 'snots and gels' and 'deformables' etc. as well as 'hard'
particles, fibers bound together by a resin, graded pore density,
filter-aids (perlite and diatomaceous earth) incorporated into the
'matrix' ... sometimes even 'specific' starches
(hydroxymethylcellulose, etc. added) to remove emulsified water,
etc. DEPTH FILTRATION, not 'ass-wipers' contained in ****-poor
made 'cheap and dirty' housings. g