On Oct 26, 10:36 pm, -rick- wrote:
wrote:
On Oct 26, 10:11 am, wrote:
On Oct 25, 10:52 pm, "
wrote:

I have finally found the dimension of the Yamaha 8hp outboard when it
is fully titled up. It takes close to 11" from the edge of the
transom inward toward the bow. This means I must remove those two
boxy structures at the stern of my boat; otherwise, the outboard would
not have room to tilt up, or I would have to mount it higher than
where I want it to be.
I found the info inwww.shipyardisland.com--notthrough their home
page, but from a search engine (Yahoo).
Hope this info is useful to someone.
Jay Chan
http://www.discountmarinesupplies.co...=71388&product...

Thanks for the suggestion of a retractable outboard motor bracket.
But I have decided to get rid of the boxy structures from the stern of
the boat for an unrelated reason anyway (to add livewells and storage
space). And I also feel that mounting the kicker directly onto the
transom probably is a better idea anyway -- at least this is easier
and cheaper to make the kicker power-tilt.

Jay Chan

I found this in my sent folder from about a year ago. Sorry
if you didn't see it then.

---
If Jay is still reading...

Fully tilted up I measure about 12" clearance required
forward from the back surface of the T8 mounting clamp
(equivalent to the back of your mounting bracket).- Hide quoted text -

- Show quoted text -

Thanks for reminding me. Somehow, I forgot about this. Sorry about
this.

Jay Chan