Removing 3 bladed prop on an Alberg 35
On Thu, 16 Aug 2007 09:59:09 -0700, Frogwatch
wrote:
There *IS* the Medieval option. Accomplished with a Sawzall upon the
defenseless rudder. Then made good with epoxy/glass, complete with
two inch set back for NEXT time :-)
Brian Whatcott Altus OK.
That is a point. The User's group listing says that the rudder is
solid mahogany....
Bruce in Bangkok
(brucepaigeATgmailDOTcom)
I will defend my suggestion although it sounds impractical for the
Alberg. A coupler properly made, probably from SS about 1" ID larger
than the shaft with deep holes drilled and then milled to size will be
as well balanced as the original.
If what you want is to get in the water, thirty minutes with a rasp
and sandpaper might do it. No sawzall needed. Or is it covered with
glass?
Casady
|