View Single Post
  #2   Report Post  
posted to rec.boats.cruising
Peter Bennett Peter Bennett is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 146
Default Voltage regulator advice needed

On Wed, 15 Aug 2007 20:22:42 -0400, "Roger Long"
wrote:

Please help me advise a friend whose boat I was looking at today trying to
get the engine running.

10 HP 2 cylinder Volvo diesel in an Albin Vega

Last time he started the engine, there was a buzzer like noise from behind
the switch panel but the engine started and ran. Not sure if buzzer noise
went away or not, I wasn't there.

Next time, there was the same buzzer noise but nothing else, not even a hint
of starter trying to go.

I went to look at it today and found that there had been a small fire inside
the elderly mechanical voltage regulator, not enough to keep it from making
a nice warning buzzer sound as one of the toasted relays chattered but
clearly enough to render it useless for anything except a doorbell.

Question: Would it be foolish to just swap in another regulator and see what
happens? Judging from the terminals, it's been fairly moist in it's
location. Could it have just gone bad on its own or is there likely an
underlying problem.


A previous boat had a 2 cylinder Volvo (MD6A?) with a "dynastarter" -
combination starter and generator. If that is the arrangement on this
boat, I suspect that your "voltage regulator" also contains the
starting relay - If so, you will have to replace it with the correct
part from Volvo.

--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca