"Jay" wrote in message
ups.com...
On Aug 13, 11:20 pm, "CalifBill" wrote:
"Jay" wrote in message

ups.com...





On Aug 12, 9:06 pm, "jamesgangnc" wrote:
Don't know that model but I know on other front mount 3.0s that is
true.
Use a board on the bottom of the boat under a bottle jack.

"Jay" wrote in message

roups.com...

I have a1997Regal with a Volvo Penta 3.0 GS. The v belt that
connects from the crankshaft pulley to the power steering pulley and
another pulley broke. It appears that the only way to replace this
belt is to remove the front engine mount. Is there another way to
install this belt?- Hide quoted text -

- Show quoted text -

Thanks for the reply Jamesgangnc. I was afraid of that.

And when you install the new belt, leave a 2nd one installed inside the
mount.- Hide quoted text -

- Show quoted text -

Excellent suggestion CalifBill. I wished Volvo used your
proactiveness. :-)


I can't remember if the '97 Volvo 3.0L front mount had a removable piece
like the same engines used in the MercCruiser, OMC's, and Cobra drives. All
you had to do was remove the long horizontal bolts from the port side and
the notched mount piece would fall away. You then had access to install a
new belt. All you had to do then is reinstall the piece and torque the 2
bolts. Sometimes a 2 x 4 was needed to move the motor slightly if the rear
mounts were sagging, to line up the bolts.

Bill Grannis
service manager