On Jul 29, 5:17 am, "Roger Long" wrote:
Hmm, no minumum flow rates indicated on the Racor site specifications page
for water separator filters.

--
Roger Long

I found info on the larger units Roger, but I feel you are going to
have to call Parker/Racor and ask an application engineer for the info
on the older systems.
I'd be interested myself to the flow ratings on the old 2000 filter
housings.

V -- How to Order
The example below illustrates how part numbers are constructed.
1000MA M P 2
Specify Model
(see chart below):
500MA1
900MA2
1000MA2
75500MAX1
75900MAX3
751000MAX3
731000MA4
771000MA5
791000MAV4
Add M for a metal bowl
instead of the standard
see--thru polymer bowl.
(Omit if not desired)
Add P for a water
sensor probe6
(Omit if not desired)
Add a micron rating:
2, 10, or 30
(The smaller the
number in micron rating,
the more contaminates
the filter will take out of
the fuel. A 2 micron
filter will take out more
contaminates than a 10
micron filter will.)
Standard fuel ports a 1 3/4"--16 UNF (SAE J1926), 2 7/8"--14 UNF
(SAE J1926), 3 7/8"--14 UNF (SAE
J514), 4 3/4"--14 NPT (SAE J476) and 5 1" NPT (SAE J476). 6 Must be
used withWater DetectionModule.
Fittings are available from Racor -- call technical support at
800.344.3286 for assistance.
Single
Duplex
Triplex
With Isolation Valves
Without Isolation Valves
75500MAX (60 GPH with one unit
on--line, 120 GPH with both units on--line)
500MA (60 GPH)
900MA (90 GPH)
1000MA (180 GPH)
731000MA (360 GPH)
75900MAX (90 GPH with one unit
on--line, 180 GPH with both units on--line)
751000MAX (180 GPH with one unit
on--line, 360 GPH with both units on--line)
With Isolation Valves
Without Isolation Valves
771000MA (540 GPH)
791000MAV (180 GPH with one unit
on--line, 360 GPH with two units on--line
and 540 GPH with three.