On 25 May 2007 13:21:06 -0700, jc wrote:

it would go up/down no problem but when the anchor tightened
into the storage positon it started to click again like the motor did
not have the power to get the anchor started. I loosened again and
motor engaged.any ideas whats wrong

Two major possibilities that I can think of:

1. Low voltage at the windlass motor due to a) bad connection
somewhere; b) low battery level; c) burned solenoid contacts.

2. Mechanical problem in windlass, ie, motor, bearings, shaft seals,
gear drive, etc.

Start with the simple possibilities by measuring the voltage at the
windlass when it is acting up. If low work backwards towards the
battery. If the voltage is low at the battery also, then that is your
problem. Otherwise, check connections for corrosion and check the
solenoid for voltage drop across the contacts.

Most mechanical issues will require a professional rebuild or
replacement.