On Tue, 22 May 2007 07:48:43 -0400, "Bryan"
wrote:

Square top mains have been around a long time. VOR 70s carry them as well
as maxi cats, open 60's and windsurfers. Nothing new here. They are made
from battens and the top twists off as the breeze comes on. (ie self reefing
since they twist)


"Wilbur Hubbard" wrote in message
...

"Gogarty" wrote in message
...
In article ,
llid says...



"Gogarty" wrote in message
news I have been doing a lot of Googling but I can;t find an answer.

You have no doubt noticed that the sails on the current crop of
America's Cup challengers are not triangular -- even with a huge roach
-- but trapezoidal. How do they maintain that shape at the head? Is
there a gaff at the head parallel to the boom? How do they keep the
head
of the sail from falling way off to leward? Is there some arrangment
of
masthead sheets that keep the head parallel to the boom?


How about using your friggin' eyes for once? Sail shape is held by
battens. Doh!

http://media3.washingtonpost.com/wp-...6/PH2007051601
455.jpg

Wilbur Hubbard

Doh! yourself. According to the North Sails artricle that top batten has
a
square or rectangular section. It is might stiff and bends very little.
But
what keeps it from going to leeward?

Tension along the leech.


How is that "gaff" kept parallel to the
boom? The article also said the ideal sail would be a rectangle. Wait a
minute...

Tension along the leech. Caused by either the mainsheet or the vang or
both.

As for a rectangular sail being optimal. It might well be for the light
winds those boats sail in and the height restrictions on the mast. They
won't even go out in anything above 18 knots and that's sad. Imagine that.
Boats costing millions and so unseaworthy a Catalina 25 takes higher winds
in stride.

Wilbur Hubbard



The limits for the Vuton cup are 7 - 23 Knots. Since wind pressure
increases as a square of the wind speed a 23 K wind exerts 1.6 times
the pressure of an 18 K wind.


Bruce in Bangkok
(brucepaigeatgmaildotcom)

--
Posted via a free Usenet account from http://www.teranews.com