wrote:

Actually there is a better way to do it. On my main I have a quart
size bleed tank mounted at the highest spot in the fuel loop. All you
do is start the main, let all the air collect in the chamber and vent
all air off the top through a clear hose into a tank for filling the
housings. You can see it in the picture on top the engine with the
loop of clear hose, sorry you can not see the valve.

http://sports.webshots.com/photo/242...63212926AEgQPt

Joe,

I've been running and working on diesels for about
35 years now, but I'm having a little trouble
understanding how your fuel setup works. From
what you wrote, I think that you have a small tank
mounted on the fuel return loop above the engine.
How does that help you if you have air in the
injector pump? Obviously, I'm missing something.

Don W.

It's between the pump and injectors. So when air comes out of the
housings it bubbles up into the chamber, all the injectors draws from
is the bottom of the chamber. So the chamber is pressurized and
collects a head of air because it is the highest point in the fuel
loop, which you open a valve to bleed off until you have no more air
or bubbles. I've been working with diesels just as long, and my boat
is the first time I've seen such a set-up. Works great, I've never
gotton even a bubble of air into the injectors, and have had some
really rough sloppy weather filter changes.

Joe

What I was missing is that you are running a
Detroit Diesel with electronic fuel injection ;-)
This technique won't work for my Yanmar because
it is ancient technology with a mechanical
injector pump and passive injectors.

Sounds like it works well on your setup.

Don W.