BoatBanter.com - View Single Post

Brian Whatcott

On Tue, 06 Mar 2007 22:39:35 -0600, wrote:

Similar to the thread topic, I am wondering what is advised for coating
a wood steering wheel?

I bought this off eBay and it is NOT one of the decorative wheels with
the brass hubs. this has a bronze hub that fits my Edson pedestal and
appears to be mahogany. It's quite weathered and I've stripped all the
remaining varnish off. (There wasn't much left anyway).

I have a sunbrella type cover for wheel/pedestal/compass so this will
not be left out in the elements when not in use.

What would be good coating options? I'm not looking for classic yacht
perfection. In fact I'm willing to trade perfection of finish off in
return for less effort in coating.

So far I have two suggestions:

1) Coat 2x with product from rotdoctor.com then 7-10 coats of varnish.
(the wheel is not rotted. But this fellow says the product is a great
sealer).

2) Use some sort of sealer or filler to even out surface, then coat 3-4x
with West epoxy.

Any thoughts or other ideas welcomed.

(My address is phoney due to spam)

I have a couple of mahogany wheels. I like them varnished.

Brian Whatcott Altus OK