View Single Post
  #32   Report Post  
John Smith
 
Posts: n/a
Default Fuel saving tips

Gould,
Since you boat with a trawler I think you have forgotten what happens when a
planning hull is no longer planning but is "muscling" it's way through the
water. Most boats drop off of planning at 2200 rpm to 2800 rpm.
The numbers do look reasonable for a "planning hull".


"Gould 0738" wrote in message
...
Mileage at 1500 rpm (6mph): approximately 6.2mpg
Mileage at 2500 rpm(9mph): approximately 3.5 mpg
Mileage at 3000 rpm(25mph): approximately 6.5mpg


TILT!

(occurs to me you kids don't fully appreciate that term).......

The performance curve seems out of whack.

The boat travels 6 mph at 1500 rpm.
Seems really slow, but let's use that.
It ought to do 6mph at a fast idle, one would think.

2500 rpm is only 9 mph? Still seems really, really, really slow, but let's

use
that.

If 2500 rpm is propelling this vessel at 9mph, it stretches the

imagination to
consider that adding 500 rpm will increase the speed by a factor of 2 1/2
times, or an additional 16mph.

Not saying it isn't so, just that it seems very unusual.

Sure the 2500 rpm isn't 19 mph, instead of
9?