John Birch wrote:
"Joe" wrote in message
ps.com...
On Feb 3, 9:09 am, Charlie Morgan wrote:
On 3 Feb 2007 06:04:29 -0800, "Joe" wrote:

On Feb 3, 2:09 am, (Thom Stewart) wrote:
Come off it Melton,
You removed the Shaft and never checked the Cutlas Bearing? Spare me.
text_html_part
1KDownload
No Kidding Thom, what kind of dip**** pulls and mic's a
shaft..balances a prop and does not check or replace the cutlass?
Joe
If either of you dumbasses could read, you would know that he didn't pull
the
shaft.

CWM
You're a ****ing idiot BB.
Lets review what he wrote.......ready..........OK

checked the shaft for straightness
without removing it, reinstalled the prop and took the boat out
again.
Same vibration, so I had it pulled again and took the shaft and prop
in for a check. Dyno balance on the prop A-ok, the shaft was true and
passed static balance no problem.

Now bonehead, how did he take it in for a check without removing it?

Joe


Given enough time Mr. Morgan will figure it out.

Doubtful. Now that RB has left, he's the simpleton of the group.