Thread: SSB noise
View Single Post
  #10   Report Post  
posted to rec.boats.electronics
krj krj is offline
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 160
Default SSB noise

Glenn Ashmore wrote:
There are 4 different electronic modules for the BD series.:
You probably have the standard 101N0210 single speed with the plastic box.
The Danfoss part number for the single speed shielded module is 101N0220.
The 101N0300 is the AEO variable speed with plastic box and the 101N500 is
AEO with shield.

The AEO future saves a bunch of amp hours by adjusting compressor speed to
the load but the single speed models can be hooked to the Frigoboat SSC and
get the same optimization with a slightly better algorithm. They both work
on the principle that the system is most efficient when it runs for long
cycles at the lowest speed but the SSC has an override to run at full speed
for chill down.

Glenn,
Yes, I checked the module and it is the 101N0210. I guess the next task
is to find someone in Ft. Lauderdale who can get the 101N220 module.
Hope it isn't a BOATbuc to get a shielded moudle. You sure changing the
module will solve the problem?
krj