Harry Krause wrote:
On 11/19/2006 8:51 PM, Dan wrote:

Harry Krause wrote:

On 11/19/2006 7:29 PM, Dan wrote:

Harry Krause wrote:

On 11/19/2006 8:09 AM, Jim wrote:

"Short Wave Sportfishing" wrote in message
...

On Sun, 19 Nov 2006 08:25:01 GMT, James Sweet

wrote:

Inverters are rated in watts.

Less than two watts for 100 mini lights.

I ran two six foot Christmas trees, about 5 100 light mini
string and
four light strings off a 350 watt inverter at last years
Festival of
Lights in Putnam and it didn't even breathe hard.

Have a freakin' ball with the lights. :)

Try closer to 50W for a string of 100 mini lights, unless
they're the
LED type.

No way. And just to prove a point, I went out to the garage and
looked on a box of colored mini lights - 150 string.

2.4 watts.

I was a little surprised honestly, but last year I acquired a
power analyzer and ran around plugging in everything I could
find in the
house. The Christmas tree with miniature lights on it was
pulling around
350W, at which point I started checking individual strings.
Incandescent
loads have a unity power factor, so you can measure the amp draw
with
any cheap multimeter and use ohms law to calculate the watts.

Interesting - that string I ran on my truck drew less than 200 watts
total.


NO WAY
2.4W.............................................. .................................................. ...

.................................................. .................................................. .........................

.................................................. .................................................. .........................


I just checked a set of icicle lights.
Individual lights =2.5V
Total of 100 lights
Fuse = 3A
No where on the package could I find watts or amps rating.
Measured draw = 300MA or 36 W


You guys need something useful to do. Come on down here. Now that
most of the leaves have fallen off the trees in my woods, and the
visibility is good, I need some fallen timber cut up and hauled. I
got 24" and 28" chain saws, axes, carts, whatever you need.


Are you paying scale?



Sure, the unskilled rate.


OK. So what's the difference?



Apprentices start at one half the rate of journeymen.

Half? So what does the apprentice make?