"Capt John" wrote in message
ups.com...

Benning Wentworth wrote:
The name of my boat, on the transom, has been on there for years. Long
before I bought her. I tried to remove the hailing port paint for a new
look last spring; couldn't get it all off. I tried all the usual
methods.

To sum up; the transom looks like ****.

I got to looking at sailboats on the net, especially the transom name,
look.
This got me thinking ??

What are your opinions of taping off the transom, dewax, sand, prime, and
put on a coat of two part epoxy .. then a new name paint job over.

I realize the paint job won't match the remainder of the hull. It would
be
more bright, I'm sure. Would you paint the transom the same color as the
boot stripe? Or, paint the color ( white in my case ) that closely
matches
the hull and paint the name the boot stripe color.

Transom opinions please ..

thanks

Painting transoms is not that uncommon, and a good guy should be able
to match the color unless it's a dark color and has faded (never get a
dark color hull, they all fade eventually, then your looking at a paint
job). You could even go with a completely differant color, as long as
the color looks good with the rest of the hull.

John


What you are planning sounds good. I would suggest using AWLGrip paint.
Many many folks have told me that this is the best and will last for years.
It is very glossy so surface prep is critical. Any imperfections will show
through.

On thing to get paint off of fiberglass is to use oven cleaner. The old
"Easyoff" like mom used works great.