Hrumpf! There is always a jackass in the group.

For what it is worth Peggie is well recognized in the marine business as an
expert in marine sanitation but she has been retired for a few years now so
she doesn't have any motive other than to try and help us avoid problems,
both sanitary and legal.

Installing a deck pump out is no big thing. Even with a cored deck you just
drill your hole through the top ply, dig out the core for half inch or so
around the hole, fill with epoxy and after it cures drill through. Then set
the fitting in a quality marine sealant. Except for the time required for
the epoxy to cure it will take maybe 20 minutes.

You better hope that nobody around you sees that blue bucket in use and
reports to the USCG or other authority or you will have a whole creek full
of it and no paddle to worry about rather than just a bucket.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"