"Shortwave Sportfishing" wrote in message
...
On 22 Sep 2006 08:44:13 -0700, "kamil" wrote:

Greetings,
I just joined the group so thanks for having this group.
I just bought an old wooden boat with inboard engine (one cylinder). It
has no electric system so it starts by turning a crank.
I bought it as a hobby - something to do in the dark and cold winter
evenings.
I want to open the motor and refurbish it. It is "Fredrikstad Mekaniske
Verksted" from Norway. The producer is long closed down.
Can anybody tip me if there exist drawings or parts for such old
engines?
Thanks for replies

Oh - good question.

When I was in my twenties, I became interested in one lung flywheel
engines which is a similar engine in concept. Working on them is
really a case of what you can machine or parts that you can adapt to
the engine - in particular with engines that are no longer produced.

You might want to look around at antique engine groups in your area
(and there are a ton of them - they are quite the hobby) and see if
any have engines similar to yours. There are also several active one
lung flywheel engine groups on Usenet that might be able to help.

I looked around on the 'net because I found this interesting. Apparently
"Fredrikstad Mekaniske Verksted" is (was) a large shipyard of sorts. I
didn't find anything on small engines of the name. I assume it's a one lung
diesel. The good thing is that all should need to run is fuel, air and some
serious cranking to get it primed.

Eisboch