"willie p" u26713@uwe wrote in message news:66643bd417b12@uwe...
How do i remove the flywheel from a 1956 johnson ob motor it is 15 hp,
when
i remove the lock not on crank and attempt to remove the flywheel,with a
puller. It will not move i cannot see any lock rings or any other type of
locking device except the lock nut.
Willie P


After removing the nut on the crankshaft that holds the flywheel, you can
use a steering wheel puller or harmonic balancer puller rented from an auto
supply store. If I remember correctly, use 1/4-20 bolts in the flywheel's 3
threaded holes. You might want to enlist the services of someone
experienced if you are unsure what to do. Be sure to use a torque wrench and
consult a service manual for the ignition parts replacements and adjustments
along with the correct flywheel nut torque.

Bill Grannis
service manager