"Gene Kearns" wrote in message
...
On 26 Jun 2006 11:26:54 -0700, jiminfl penned the following well
considered thoughts to the readers of rec.boats:

No doubt about it. You have a bad switch. Try Walmart or an auto parts
store. If you live near water, try a marine store.
Jim
BlueThunder wrote:
Please excuse my ignorance; I'm not a mechanic. I have a 1984 18 ft
open bow Rinker with a Mercruiser 185 I/O engine. Sometimes when I
turn the ingition switch, nothing happens (no clicking or anything).
After I try it 3 or 4 times, the engine starts fine. Is it likely a
bad ignition switch? As far as I know, it's the original switch. If
it is the switch, ideas on where to get a new one?

Whoa....... dood..... there is a LOT of doubt about it...... It could
be anything from the ignition switch to a sticking starter
solenoid....

.... time to diagnose, not swap parts....

--

Grady-White Gulfstream, out of Oak Island, NC.

Homepage
http://myworkshop.idleplay.net/

Rec.boats at Lee Yeaton's Bayguide
http://www.thebayguide.com/rec.boats


I was also thinking that a bad solenoid could also be the problem. Loose
wire connections at the ignition switch, battery or solenoid are also
possible.