Jabsco makes a pump mounted on a plastic bucket that works great. I had to
change it to a 5 gallon bucket because my diesel holds 14 qts., but that was
no problem. It works much better than anything else I've seen or tried. As
others mentioned, you can build your own as well, just make sure the pump is
rated for oil and/or petroleum products. If you're in a gasoline
environment, be sure it's explosion proof.

--


Keith
__
Never test the depth of the water with both feet.
wrote in message
...
Hi,

What's the best thing for the money for removing oil
from a motor in the bilge? I bought a drill pump, and
it worked okay. Once! After that it would never work
again. Someone told me about using a basting squeeze
bulb, and that worked great getting some lube out of
a transfer case, but it took quite a while and a lot of
times filling and emptying it. It would take forever to
empty a motor of oil, unless there's a quart size or
something.

Thanks for any suggestions,
David