Thread
:
Caulk recommendations...
View Single Post
#
5
posted to rec.boats
[email protected]
Posts: n/a
Caulk recommendations...
wrote:
.. My goal is to make neat and clean just as it was from the
factory.
In that case, you will need to
1) run masking tape along the top and bottom of the rubrail.
2) remove the rubrail entirely
3) put a little bit "too much" caulk between the strips of masking tape
where the rubrail will be replaced
4) reinstall the rub rail, allowing excess caulk to squeeze out onto
the tape
5) strip away the tape before the caulk begins to "set" to create a
clean, crisp edge
Reply With Quote
Caulk recommendations...