Dennis Pogson wrote:
Stephen Trapani wrote:
Roger Long wrote:
Yes, there is the little circuit board you can see he
http://home.maine.rr.com/rlma/MOB.htm
If you put the voltage directly to it, it is steady.
I think it was probably defective before I started tinkering with
it. I forgot before I posted that I hadn't tested it as it came out
of the box.
I just determined that one board handles two LED's so I'm just
wiring them up in series. That will actually be better. The other
way would have provided some redundancy but the light wouldn't
really have appeared to flash but just change intensity. This
will be much clearer.
The LED's are very bright but the beam is focused. I'm going to aim
them both up the pole, one on each side, for 360 degree coverage.
The side lobe will be plenty bright on a dark night and the focused
beams should shine on the white shaft and up to the flag making the
while thing quite recognizable and visible.
How will you make it waterproof?
Good question. That's exactly what I was thinking!
Dennis.
Curious to know why you didn't just leave the bike light intact. They are
reasonably watertight and weigh practically nothing.
Dennis